Tile and Grout Cleaning

Tile and Grout Cleaning FAQs

Straight answers to the questions we're asked most.

How much does professional tile and grout cleaning cost?

Professional tile and grout cleaning in the UK typically costs £4 to £8 per square metre for ceramic or porcelain floors, with a minimum charge of around £120. Shower enclosures usually cost £90 to £160. Grout colour sealing is about £8 to £15 per square metre, and natural stone cleaning and sealing £10 to £25 per square metre.

Can dirty grout be cleaned or does it need replacing?

Most dirty grout can be cleaned rather than replaced. A professional deep clean with alkaline cleaner, scrubbing and extraction removes the majority of embedded dirt. If grout is permanently stained, colour sealing gives a uniform finish. Only cracked, crumbling or missing grout needs raking out and replacing.

Why does my grout keep going black?

Grout goes black because it is porous and absorbs dirty mop water, grease and soap residue, and in damp areas mould grows in it. Using too much floor cleaner, not rinsing it off and poor ventilation in bathrooms all make it worse. Sealing grout after cleaning slows the process considerably.

Does steam cleaning work on grout?

Steam cleaning can loosen surface dirt on grout, but on its own it rarely removes deeply embedded soil and can push dirty moisture further into unsealed grout. It also risks damaging some sealers and natural stone. Professional cleaning combines chemical dwell time, scrubbing and extraction, which lifts dirt out of the grout.

What is grout colour sealing?

Grout colour sealing is a coating brushed into grout lines after cleaning that bonds to the grout, covers stains and seals it at the same time. It gives a uniform colour across the floor or wall and comes in a range of shades. It is a practical alternative to regrouting where grout is sound but permanently discoloured.

How often should grout be sealed?

Grout in busy floors and showers usually benefits from resealing every one to three years, depending on traffic, cleaning products and the sealer used. A simple test is to drip water on the grout: if it darkens and soaks in quickly, the sealer has worn off. Colour sealed grout generally lasts longer.

Can I use vinegar on tiles?

Vinegar can be used occasionally on glazed ceramic and porcelain tiles, but it should never be used on natural stone such as marble, limestone or travertine, because the acid etches the surface. Regular use of vinegar can also degrade cement-based grout over time. A pH-neutral tile cleaner is safer for routine cleaning.

How long does tile and grout cleaning take?

A typical kitchen or hallway floor of 10 to 20 square metres takes two to three hours to clean, plus drying time. A shower enclosure takes one and a half to two and a half hours. Sealing adds time and needs dry grout, and natural stone or Victorian tile restoration can take a full day or more.

Can you restore Victorian hallway tiles?

Yes, original Victorian geometric and encaustic tiles can usually be restored. Old wax, paint and adhesive are removed carefully, the tiles deep cleaned, efflorescence treated and a breathable sealer applied. Cracked or missing tiles can sometimes be replaced with reclaimed or reproduction pieces. The result often transforms a period hallway.

How do I clean grout myself?

To clean grout yourself, apply an alkaline tile and grout cleaner, leave it for a few minutes, then scrub with a stiff narrow brush. Rinse thoroughly with clean water and wipe or vacuum up the dirty water, rather than leaving it to dry. Avoid bleach on coloured grout, and acids on natural stone.

Can mouldy silicone be cleaned?

Surface mould on silicone can sometimes be removed with a mould remover, but once black mould has grown into the silicone, it cannot be fully cleaned out. The only lasting fix is to cut out the old silicone, clean and dry the joint, and apply fresh mould-resistant sanitary silicone.

How long after cleaning can I walk on the floor?

You can usually walk on a cleaned tiled floor in socks after about an hour, with full drying in two to three hours depending on ventilation. If grout has been sealed or colour sealed, avoid heavy traffic and mopping for around 24 hours so the sealer can cure properly.

Get a free tile and grout cleaning quote

Tell us what you need and we'll come back with a clear price.

Request a quote